2.2.2 Power Switch
Turn the router On or Off by pressing the power switch at the rear of
the router.
Power Switch
2.3 Interface and Installation
2.3.1 Interface Description
Rear View of Router
(1) USB: Test and diagnostic interface for factory use only.
(2) WPS:WPS button is used to start Wi-Fi Protected Setup
authentication process.
(3) ANT: External antenna connector. If external antenna is connected,
the internal antenna is of no effect.
(4) PHONE: Standard RJ11 connector for Telephone.
(5) LAN 1~ LAN 2: Ethernet connections to computer.
(6) POWER Socket: Connection to the external power supply.
(7) POWER Switch: Turn the router ON or OFF.
To Next Page
Loading...
Need help?
General
