Navigating the Device
Slide the Power Switch to the ON position to turn on the ZTE Unite. The screen
lights up. After the initialization of the ZTE Unite, the SSID and default password
will display on the screen. Press the OK button, the following icons will appear:
NOTES:
When powering on, the ZTE Unite will take a while to check for new messages.
Do not power off and on repeatedly during the process.
Devices and software are constantly evolving — the screen images and icons
displayed are for reference only and may differ from your device.
Resetting Your ZTE Unite
Simply press and hold the Reset Button about 3 seconds to restore your ZTE
Unite to the factory default settings.
13
To Next Page
Loading...
Need help?
General
