18
3 Basic Operations
3.1 Making a Call
In standby mode, signal strength icon is displayed on upper left corner
of screen. And then, you can make or answer calls.
1. Power-on ZTE WP623.
2. To either make or answer a call, you can pick up the receiver or
press HANDFREE key, or key in number directly and press
CALL/REDIAL key to dial.
3. Make a call or answer a call as steps detailed in the following.
Note: When SIGNAL indicator turns off and there is no dial tone while
picking up the phone receiver, maybe RF signal is weak or antenna is
not screwed on and fixed not well. Change the position of the terminal
or check the antenna installation.
3.1.1 Making a Domestic Call
Press Number key to key in phone number, and add area code when
making a long distance call (no need to add area code when dialing
local number in some area). Press CALL/REDIAL key to send a call.
Press
key to end the call and conversation.
3.1.2 Making an International Call
Enter the country code, area code (without the leading “0”) and the
complete telephone number you want to dial, press CALL/REDIAL
key
to call out.
Country code +
To Next Page
Loading...
Need help?
General
