7
Reset the OBD2 Device
You can reset the OBD2 device to the factory setting on the OBD2 device or the 4G Mobile
Hotspot configuration page. (This is useful if you have lost your Admin Login for the 4G Mobile
Hotspot configuration page.)
NOTE:
If you reset the modem to factory settings, all of your customizations will be lost. If you want to
keep them, save them before doing the reset, and then restore them afterward. Note: When you
reset the OBD2 device, any currently connected devices will lose access and will have to be
reconnected after the OBD2 device restarts.
On the OBD2 device:
Insert a pin into Reset hole and hold for about 3 seconds until the LED1 indicator turns red.
After the device has reset, reconnect Wi-Fi devices.
On the 4G Mobile Hotspot configuration page:
Log in as Administrator.
Select Settings > Device Settings.
Select Reset.
Restart the OBD2 Device
You can restart the OBD2 device by pressing the restart key.
To Next Page
Loading...
Need help?
General
