Zte ZXR10 2918E-PS User Manual

Chapter4ServiceConguration
CommandFunction
zte(cfg)#setzesrdomain<1-4>linkhello{add|delete}port<1-28>Addsordeleteslinkhelloport.
zte(cfg)#setzesrdomain<1-4>linkhello-timer<1-3>linkhello-failtimer
<3-9>
Setslinkhellopacketsendinginterval
andlinkhellomechanismtimeout.
zte(cfg)#setzesrdomain<1-4>linkhello{enable|disable}
Enablesordisableslinkhello
mechanism.
zte(cfg)#setzesrdomain<1-4>{enable|disable}EnablesordisablesZESRdomain.
zte(cfg)#setzesrdomain<domainId>major-levelmode{zess-master|zess-tr
ansit|zess-edge-master|zess-edge-transit}
Setstheattributeofanodeonthe
major-levelringonacross-device
smart-link.
zte(cfg)#setzesrdomain<domainId>level<levelId>segment<segId>
mode{zess-master|zess-transit|zess-edge-master|zess-edge-transit}
Setstheattributesofthenodesonthe
slaverydeviceringundercross-device
smart-link.
zte(cfg)#setzesrdomain<domainId>tcn{cancel-sending|sending}
SetsthemodetosendTCNinaZESR
domain.
zte(cfg)#setzesrtcn-sendingport<portlist>{enable|disable}
EnablesordisablesaporttosendTCN
packets.
zte(cfg)#setzesrtcn-sendingtrunk<trunklist>{enable|disable}
Enablesordisablesatrunkporttosend
TCNpackets.
zte(cfg)#setzesrprotocol-mac{normal|special}SetstheZESRprotocolMACmode.
zte(cfg)#clearzesrdomain<1-4>DeletesZESRdomain.
showzesrdomain[<1-4>](allcongurationmodes)DisplaysZESRconguration.
ZESRSingleRingNetworkingExample
lCongurationDescription
AsshowninFigure4-41,S1isMasternode,P1isPrimaryPort,P2isSecondary
Port.S2~S4areTransitnodes.Theprotectinstanceintheringis1,theprotected
dataVLANis100andtheprotocolcontrolVLANis4000.
4-101
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2918E-PS Specifications

General

MAC Address Table Size	8K
VLANs	4K
Jumbo Frame	9K
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
PoE	802.3af/at
Power Supply	AC 100-240V
Dimensions (W x D x H)	440mm x 44mm