Zte ZXR10 2918E-PS User Manual

Chapter5Management
Cmdr.zte(cfg-group)#showztpdevice
Lastcollectionvlan:1
Lastcollectiontime:210ms
IdMacAddressHopRoleHostNamePlatform
------------------------------------------------------
000.00.00.00.00.010cmdrCmdr.zteZXR102928E
100.0d.0d.f1.e2.001candizteZXR102918E
200.50.43.3c.3b.5d1candizteZXR102910E-PS
300.00.00.00.33.332candizteZXR102918E
Cmdr.zte(cfg-group)#setgroupadddevice1-3
Addingdeviceid:1...Successedtoaddmember!
Addingdeviceid:2...Successedtoaddmember!
Addingdeviceid:3...Successedtoaddmember!
Cmdr.zte(cfg-group)#showgroupmember
IdMacAddressIpAddressHostNameState
-------------------------------------------------
100.0d.0d.f1.e2.00192.168.1.2/24Mem1.zteUp
200.50.43.3c.3b.5d192.168.1.3/24Mem2.zteUp
300.00.00.00.33.33192.168.1.4/24Mem3.zteUp
3.SwitchtoeachmemberswitchandaddallportstoVLAN4000(takingmember4
asanexample).
Cmdr.zte(cfg)#setvlan4000enable
Cmdr.zte(cfg)#setvlan4000addport1-16tag
Cmdr.zte(cfg)#rloginmember1
Trying...Open
Connecting...
Mem1.zte>
Mem1.zte>enable
password:
Mem1.zte(cfg)#setvlan4000enable
Mem1.zte(cfg)#setvlan4000addport1-16tag
4.DeletetheclustercreatedonVLAN1.
Cmdr.ZTE(cfg-group)#setgroupdeletemember1-3
Deletingmemberid:1...Successedtodelmember!
Deletingmemberid:2...Successedtodelmember!
Deletingmemberid:3...Successedtodelmember!
Cmdr.zte(cfg-group)#setgroupcandidate
zte(cfg-group)#
5.CreateaclusteronVLAN4000.
zte(cfg-group)#setztpvlan4000
zte(cfg-group)#setgroupcommanderipport1
Cmdr.zte(cfg-group)#ztpstart
Cmdr.zte(cfg-group)#showztpdevice
Lastcollectionvlan:4000
Lastcollectiontime:230ms
5-21
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2918E-PS Specifications

General

MAC Address Table Size	8K
VLANs	4K
Jumbo Frame	9K
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
PoE	802.3af/at
Power Supply	AC 100-240V
Dimensions (W x D x H)	440mm x 44mm