Zte ZXR10 8900E series User Manual

ZXR10 8900E series Core Switch Product Description
108
© 2013ZTE CORPORATION. All rights reserved.
ZTE Confidential Proprietary
6 Typical Networking Mode
6.1 Application in Metro Ethernet
ZXR10 8900E can be deployed in the aggregation layer of metro Ethernet. Metro
Ethernet has the demand for unified bearing of mobile, fixed broadband and Enterprise
Customer and separated bearing of IP-based audio, video, data and IPTV services.
ZXR10 8900E can realize full-service bearing and isolation of different service by VPN
technology and provide carrier-class reliability for the operators with ring network
technology, multiple protection technologies and OAM.
 Realize isolation of end-to-end service and bearing by MPLS to edge mode to
provide higher reliability and security;
 Different service planes bear different services by MPLS VPN technology;
 Ensure 50ms fast protection switching by MPLS TE/FRR/BFD technology;
 Realize fast fault discovery by MPLS OAM/Ethernet OAM to improve network
operation maintenance capability.
Common networking of multi-service bearer metro Ethernet is as shown in Figure 6-1.
Figure 6-1 Application in metro network

Zte ZXR10 8900E series Specifications

General

Series	ZXR10 8900E
Category	Switch
Storage Temperature	-40°C to 70°C
Relative Humidity	5% to 95% (non-condensing)
Type	Modular switch
Port Density	Up to 576 x 10GE ports, 144 x 40GE ports
Ports	10GE, 40GE, 100GE
Redundancy	Redundant power supplies, fans, and control modules
Network Protocols	IPv4/IPv6, MPLS, VXLAN
Management	CLI, SNMP, Web
Power Supply	AC/DC
Weight	Varies by configuration
Operating Temperature	0°C to 45°C
Power Consumption	Varies by configuration
Slots	8