Settings
BusinessPhone – Dialog 4222 Office / Dialog 3211 & 321294
Ringing volume
2*0— 9 Press.
You will hear the selected volume (0...lowest volume, 9...highest).
You only have to press the last digit to select another ringing
volume.
í Press to finish the procedure.
Note: This programming is not applicable when you have
selected ringing type 2.
Ringing character
3*0— 9 Press.
You will hear the selected character. You only have to press the last
digit to select another ringing character.
í Press to finish the procedure.
Melody programming
If you want a personal melody when your telephone rings, this can
be programmed for internal, external or Callback calls.
Note: For the Dialog 3212 Standard this function requires
the release number R7B or higher; for the Dialog 3211
Economyplus this function requires the release number
R6B or higher, see the underside of your telephone. If you
can enter
Melody Mode your telephone supports this
function.
Melody Mode
í*7 Press and hold to enter Melody Mode.
Enter Programming mode to program a melody.
Or:
# Press to exit Melody Mode.
To Next Page
Loading...
Need help?
General