Installation, Administration and Maintenance
Aastra Telecom Page: 25 (47)
The recommended parameters that should be configured through the
OpenMobility Configurator Tool are:
• Use local configuration: YES
• IP Address
• Subnet
• TFTP Server Address
• TFTP File Name
• OMM IP Address
• Router Addresses (default gateway)
• DNS Addresses
• DNS Domain
• Country (ie 100 for North American tones)
• NTP Server Address
Press the “Send configuration” button to transmit the parameters to an RFP.
The configuration can only be set after powering up or at the retry phase
(LED flashing 0,25 Hz) or in kernel mode, please see section 3.1.6 for
details. The configurator tool waits 2 seconds and retries transmitting the
data 3 times.
If you want to read the configuration parameters from an RFP set the MAC
address and the IP address additionally and press the “List configuration”
button. All parameters will be listed in the OM Configurator tool.
Press the “Reset configuration" button to clean all input fields and additional
parameters.
To Next Page
Loading...
Need help?
General
