42 266HSH MODBUS TRANSMITTER | PRESSURE/TEMPERATURE MULTIVARIABLE | OI/266HSHMT-EN REV. A
reconfigure itself with the previous configured
9.6 Electronic upgrade from Standard to Advanced
HART
Attention.
In case of electronic upgrade from Standard to
Advanced HART it is necessary to perform a full transmitter
reconfiguration since all customized data will be lost.
1. Follow all points listed in the previous paragraph from
1 to 5.
10 Hazardous Area considerations
10.1 Ex Safety aspects and IP Protection (Europe)
sketches.
—
—
—
—
transmitter enclosure with a Ta (ambient
Da
Important. The number close to the CE marking of the
transmitter safety label identifies the Notified Body which has
responsibility for the surveillance of the production.
— T4: Temperature class of the transmitter
— T5: Temperature class of the transmitter
— T6: Temperature class of the transmitter
Application with Gas
Application for pressure transmitter Ex ia categories
1Ga and 1Da
Application with Dust
degree associated to the
ia
To Next Page
Loading...
Need help?
General
