7.5 Weight specifications
Definition
In installation, repair, and maintenance procedures, weights of the components
handled are sometimes specified. All components exceeding 22 kg (50 lbs) are
highlighted in this way.
To avoid injury, ABB recommends the use of a lifting accessory when handling
components with a weight exceeding 22 kg. A wide range of lifting accessories
and devices are available for each manipulator model.
Example
Following is an example of a weight specification in a procedure:
NoteAction
CAUTION
The robot weighs 1950 kg.
All lifting accessories used must be sized accord-
ingly.
380 Product manual - IRB 6660
3HAC028197-001 Revision: S
© Copyright 2007-2018 ABB. All rights reserved.
7 Reference information
7.5 Weight specifications