ABB MicroSCADA Pro SYS 600C User Manual

SYS 600 software
The SYS 600 software can be extended or upgraded to new versions. This is done with
the normal ordering tool with the upgrade/extension options. SYS 600 Hotfixes and
Service Packs can also be freely taken into use. New SYS 600 versions will be available
for the SYS 600C hardware for at least 4 years after the hardware delivery. After that
new SYS 600 software versions may require an upgrade of the hardware.
The SYS 600 software license is bound to the Hardware Key that is installed inside the
computer.
Product identification
The SYS 600C product is identified by the computer version and the SYS 600 software
version.
Example: SYS 600C 1.92 Hardware version 1, SYS 600 software version: 9.2
Software options5.2.
Communication protocols5.2.1.
The following tables list the communication protocols of SYS 600C.
Table 5.2.1-1 Master protocols
Master protocol
IEC 61850-8-1 Client
LON/LAG
SPA Bus
IEC 60870-5-101
IEC 60870-5-103
IEC 60870-5-104, Single or redundant
DNP 3.0 LAN/WAN
DNP 3.0 Serial
Modbus RTU
Modbus TCP/IP
RP 570/571
ANSI X3.28 FD/HD
P214
ADLP 180
26
1MRS756804
MicroSCADA Pro
SYS 600C 1.92
Product Guide

ABB MicroSCADA Pro SYS 600C Specifications

General

Brand	ABB
Model	MicroSCADA Pro SYS 600C
Category	Gateway
Language	English