21. Ordering for Accessories
Accessories
IP15151-1 v1
Interface converter (for remote end data communication)
M16668-3 v9
External interface converter from C37.94 to G703
Quantity: 1MRK 002 245-AA
External interface converter from C37.94 to G703.E1 Quantity: 1MRK 002 245-BA
Test switch
SEMOD111888-5 v12
The test system COMBITEST intended for use with the IEDs
is described in 1MRK 512 001-BEN and 1MRK 001024-CA.
Please refer to the website: www.abb.com/protection-control
for detailed information.
Test switches type RTXP 24 is ordered separately. Please
refer to Section
Related documents for references to
corresponding documents.
RHGS 6 Case or RHGS 12 Case with mounted RTXP 24 and
the on/off switch for dc-supply are ordered separately. Please
refer to Section Related documents for references to
corresponding documents.
Protection cover
M15040-3 v6
Protective cover for rear side of RHGS6, 6U, 1/4 x 19” Quantity: 1MRK 002 420-AE
Protective cover for rear side of terminal, 6U, 1/2 x 19” Quantity: 1MRK 002 420-TA
Combiex
IP15161-1 v1
Key switch for settings
SEMOD130356-4 v6
Key switch for lock-out of settings via LHMI Quantity: 1MRK 000 611-A
Note: To connect the key switch, leads with 10 A Combiflex socket on one end must be used.
SEMOD130267-5 v6
Mounting kit Ordering number
Side-by-side mounting kit Quantity: 1MRK 002 420-Z
Conguration and monitoring tools
IP15162-1 v2
M15042-3 v4
Front connection cable between LHMI and PC Quantity: 1MRK 001 665-CA
SEMOD131414-4 v3
LED Label special paper A4, 1 pc Quantity: 1MRK 002 038-CA
LED Label special paper Letter, 1 pc Quantity: 1MRK 002 038-DA
Manuals
M15161-3 v13
Note: One (1) IED Connect USB flash drive containing user documentation (Operation manual, Technical
manual, Installation manual, Commissioning manual, Application manual and Getting started guide),
Connectivity packages and LED label template is always included for each IED.
1MRK 506 384-BEN A
Line distance protection REL650 2.2
Product version: 2.2.1
86 ABB
To Next Page
Loading...
Need help?
General
