ABB Terra 54 Series User Manual

TERR A 54 / 54 H V CHAR G ER
2018- 10- 03 31/40
• Tools: Network cable pliers, RJ45 connector; network cable straight,
1. Cut the network cable to the correct length to reach the Ethernet connector. The
connector is located behind the right side door, near the bottom of the charger.
2. Use network cable pliers to install an RJ45 connector on to the network cable.
3. Insert the RJ45 connector into the Ethernet connector.

ABB Terra 54 Series Specifications

General

Output Power	50 kW
Display	7-inch touchscreen
Network Connectivity	Ethernet, Wi-Fi, 4G
Enclosure Rating	IP54
Charging Standards	CHAdeMO, CCS
Communication Protocols	OCPP 1.6
Input Voltage	400 V AC
Current	125 A