Absen NX Series User Manual (English)

Questions and Answers:

B
Brittany LeeAug 13, 2025
How to fix some modules not lighting on Absen Monitor?
- I
  Isaiah FosterAug 13, 2025
  If some modules on your Absen Monitor aren't lighting up, here are some things to check: * Ensure the power plug of the module is securely inserted. * Inspect the power cable for any signs of burning. * Verify the switch power supply of the module is outputting power. * Check the flat cable for malfunctions; if needed, replace it. * Consider replacing the module or the receiving card. * Try sending the rcfg file.
P
Paula CoxAug 16, 2025
What to do if the whole screen is not lighting on Absen Monitor?
- S
  Stephanie WilliamsAug 17, 2025
  If your entire Absen Monitor screen isn't lighting up, try these steps: * Make sure the screen power is turned on. * Check that the DVI or HDMI cable is securely connected. * Ensure the main data cable is tightly inserted. * Verify the sending card is powered on and the running indicator is flashing. If these steps don't work: * Try replacing the sending card. * Connect your computer to an LCD display to check the video card output. * Update the video card driver or replace the computer if necessary.
B
bbeckAug 20, 2025
What to do if Absen NX Monitor screen show scramble d image?
- R
  Ryan JohnsonAug 21, 2025
  If your Absen Monitor screen is showing a scrambled image, try the following: * Ensure the receiving card's power plug is securely inserted and that the power cable isn't burnt out. * Check that the power supply is outputting power. * Inspect the receiving card's data cable; replace it if necessary. * Try sending the rcfg file. * Consider upgrading the firmware version of the receiving card or replacing the receiving card.