•Turn the meter off and on again. Repeat the test.
Wait until the hand symbol has appeared in the
display before touching the test strip against the
blood drop.
•Clean the optical system and repeat the test.
• Insert a new test strip drum.
• Hold the meter upright and let the strip drop out,
or remove the strip manually, even if it takes a
small amount of force.
• Repeat the test with a new strip, this time
ejecting it by means of the ON/OFF button.
If this test result agrees with the way you
feel, follow your doctor’s advice. If the way
you feel does not agree with this test result,
please perform a quality control check
with Compact Control solution and a new
test strip.
Action
9190
11 Display messages
Display Cause
•You touched the test strip
against the blood drop
too soon.
•The optical system is dirty.
•The test strips are too old.
•The meter was turned off
and on again. The strip is
still in the meter.
•You forcibly removed the
test strip during testing.
The blood glucose result is
above the upper limit of
33.3 mmol/L.
Warning!
To Next Page
Loading...
Need help?
General
