56
Protection class III
Meter type The Accu‑Chek Performa Meter is suitable for
continuous operation.
Control solution storage conditions Refer to the control solution package insert.
Electromagnetic Compatibility
This meter meets the electromagnetic immunity requirements as per EN ISO 15197 Annex A. The chosen
basis for electrostatic discharge immunity testing was basic standard IEC 61000‑4‑2. In addition, it meets
the electromagnetic emissions requirements as per EN 61326. Its electromagnetic emission is thus low.
Interference from the meter to other electrically driven equipment is not anticipated.
Performance Analysis
Refer to the test strip package insert.
Test Principle
Refer to the test strip package insert.