Acer AL1911 User Manual

37
8.3 Dimension Size and Weight
Dimension size 433 (W) x 447 (H) x 235 (D)
Net Weight 6.5Kg
Gross Weight 9 Kg
8.4 Gap Spec.
8.4.1 The step between front bezel and back cover shall be within specification.
Back Cover & Bezel Gap
0.8 mm ≤ A ≤ 1.2 mm
Back Cover & Bezel Alignment
0 mm ≤ D ≤ 0.8 mm
Back Cover & Cable Cover Gap
0.8 mm ≤ B ≤ 1.2 mm

Acer AL1911 Specifications

General

Brand	Acer
Model	AL1911
Category	Monitor
Language	English

Summary

2. ELECTRICAL REQUIREMENTS

2.1 General Electrical Specifications

2.4 Input Signals and Interfaces

Covers video/sync signals, interface frequencies, supported timings, and connector details.

2.5 Controls and OSD Functions

Explains front panel controls, OSD functions, and descriptions.

2.7 Power Management

Details VESA DPMS compliance, power consumption, and power connector type.

3. VL-901 DISPLAY CONTROL BOARD

3.1 Description and Features

Explains the board's purpose, features like microprocessor, memory, and language support.

3.3 Block Diagram

3.4-3.6 Connector Information

4. VK906 Control Panel Board

4.1 Description

4.2-4.4 Control Panel Connectivity and Controls

5. POWER SUPPLY (VI-902)

5.1 Electrical Specifications

Covers AC/DC circuit input/output, inverter circuit, and DC outputs.

5.2 Pin Assignments and Requirements

7. TROUBLESHOOTING

7.1 Troubleshooting Procedures

Outlines main procedure flowcharts for power, backlight, performance, and function issues.

9. Power Line Transient Test (IEC 61000-4-4)

9.1-9.10 Test Parameters and Procedure

Specifies test parameters like peak voltage, polarity, duration, and the overall test procedure.

10. Power Line Surge Test (IEC 61000-4-5)

10.1 Climatic Conditions and 10.2 Test Conditions

12. REGULATION COMPLIANCE

12.1 Regulatory Compliance Standards

Lists various safety, EMC, and ergonomic standards the product complies with.

12.2 Electrostatics Discharge (ESD) Test

Details the ESD test procedure, voltage levels, and criteria based on IEC 61000-4-2.

13. QUALITY AND RELIABILITY

13.1 Quality Assurance

13.2 Reliability