Chapter 2 19
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press
m during POST (when “Press <F2> to enter Setup” message is prompted
on the bottom of screen).
Press m to enter setup; press <C> to boot from CD-ROM; press <F12> to change boot device.
PhoenixBIOS Setup Utility
Info. Main System Device
Security Boot Exi
CPU Type: Intel Pentium(R) 4 CPU 2.66GHz
CPU Speed: 2660MHz
HDD1 Model Name:
HDD1 Serial Number:
ATAPI Device:
System BIOS Ver: A3Axx
VGA BIOS Ver:
KBC Ver: x.x
Serial Num: xxxxxxxxxxxxxxxxxxxxxx
Asset Tag Number:
Product Name: Aspire 1700
Manufacture Name: acer
UUID: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select 4Sub-Menu F10 Save and Exit
System Utilities
Chapter 2
justmanuals.com
To Next Page
Loading...
Need help?
General