4 Managing the server
96
Set the home server uptime and
down time
You can define times when the home server has to be up and running
or define services where the server is never put into sleep mode during
an active backup operation to reduce the risk of data loss.
Note: When creating an uptime you must enter a start and end
time. The uptime end action can be created as a standalone action
or in combination with an uptime.
To set the home server uptime and downtime:
1 Double-click the Windows Home Server icon in the system
tray.
2 Log on to the Windows Home Server Console.
3 Click the Lights Out tab.
Home computers are indicated by color blocks in the diagram.
When you have more then 6 computers, the colors will be
duplicated. The diagrams are created from left to right in the same
order as the legend from top to bottom.
To Next Page
Loading...
Need help?
General
