15
b. Select the “RecKind”: “Video”, “Audio” (only records music) with signal input, and
speech (only recorded by microphone), and press “Enter” key to confirm.
c. Select “Quality”: HighQ, MediumQ, and LowQ, press “Enter” to confirm.
d. Select ”Start” ,press “Enter” to start recording and repress “Enter” to preview mode.
e. Select “Preview”: Only preview the input signal, but no recording.
f. Select “Time” , Use “up” or “down” to set timetable(year、month、day、hour、minute)
and press “Enter” to confirm.
g. Press “Esc” key to stop the recording, and close MP400 and remove AV cable or
long press “ESC” for 3 second to return to the main menu.
h. During recording, you can select “Preview” function (press “Enter” key) to stop the
recording, but the playback function is still active at that time. Press “Enter” key to
continue the recording. Such function will allow you to preview while nothing is
being recorded.
2) Video Output Function:
a. Please use AV cable to connect the AV output connector of MP400 Player and AV
input connector of A/V device, respectively, to enjoy the large-screen video and
stereo music. (For the connection, please refer to the User’s Manual of AV device).
b. Turn on the MP400 Player and TV or stereo music device, and set up the MP400 for
normal video or music playback. Eventually press “TV/Hold” key (don’t press it for a
long time), the video will convert into TV display, and music will convert into stereo
music device output. Pressing “TV/Hold” key again will stop AV output, and resume
the display of MP400 Player.
Note: The setup of MP400 TV device shall be in conformity with the setup of TV during
video output period. (The MP400 TV Setup is shown in setup menu, and TV Setup of
TV is shown in User’s Manual of TV device.)
7. File Operation
To Next Page
Loading...
Need help?
General
