4
4. Charging of Battery
This section includes: charging of battery, and the use of external power adapter.
4.1 Power Volume Indication
Battery is fully charged Battery is partially drained Battery is drained
Note: If the power volume indication of battery shows only one block or is empty, it
indicates the power supply is obviously lacking, please charge the battery.
4.2 Charging of Battery
You can use the external power adapter to charge the battery. The charging can be
performed when the power of MP400 Player is on or off. The detailed charging method is as
follows:
1) Connect the power cable with the power adapter.
2) Insert the DC plugs of power adapter into the DC input port of MP400 Player.
3) Insert the power plug into the power socket.
4.3 Use of External Power Adapter
You can use external power adapter to supply directly power for MP400 Player. The
operation method is the same with the battery charging method.
5. Connection of External Interface
1) Connect Television for viewing
Use AV cable to connect to AV out socket of MP400 Player and input socket of signal of
television.
2) Connect Television for Recording
Connect the output socket of signal of television set and AV input socket of MP400
Player through AV cable.
3) Connection of Music Device
Insert the AV cable into the AV input socket of MP400 Player. Connect the music signal
(left/right) of AV cable through “Y” type cable. Insert other end of Y type cable into the
output socket of music device.
To Next Page
Loading...
Need help?
General
