40
Ceiling Mount Installation
If you wish to use a third party ceiling mount kit, please ensure the screws used
to attach a mount to the projector meet the following specifications:
• Screw type: M4 x 10L
Note: Please note that damage resulting from incorrect
installation will void the warranty.
Warning:
• If you buy a ceiling mount from another company, please be sure to use
the correct screw size. Screw size will vary depending on the thickness of
the mounting plate.
• Be sure to keep at least 10 cm gap between the ceiling and the bottom of
the projector.
• Avoid installing the projector near a heat source.
To Next Page
Loading...
Need help?
General
