... English
17
On-Screen Display Menus
The Projector has multilingual On Screen Display menus that
allow you to make image adjustments and change a variety of
settings. The projector will automatically detect the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Control or
press “Menu”on the Control Panel.
2. When OSD is displayed, use
keys to select any item in the
main menu. After selecting the desired main menu item, press
to enter sub menu for feature setting.
3. Use
keys to select the desired item and adjust the settings
by key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Menu” on the Remote Control or press “Menu”on the
Control Panel, the screen will return to the main menu.
6. To exit OSD, press “Menu” on the Remote Control or press “Menu
”on the Control Panel again. The OSD menu will close and the
projector will automatically save the new settings.
User Controls
Main Menu
Sub Menu
Sub Menu
To Next Page
Loading...
Need help?
General
