English...
32
Replacing the lamp
The projector will detect the lamp life itself. It will show you a warning
message “Lamp is approaching the end of its useful life in full power
operation. Replacement Suggested!” When you see this message,
changing the lamp as soon as possible.
Make sure the projector has been cooled down for at least 30 minutes
before changing the lamp.
Do not operate the lamp longer than rated lifetime. Otherwise it could
be high possibility of lamp shattering. A compulsive putting-out-lights
function should operate by the projector side so that the lamp after a
life is not used after that for a long time. We recommend attachment
of a timer etc., and attachment of a lamp exchange display function to
a projector lighting time management of a lamp. (Recommendation
of a regular shutdown).
Appendices
Warning: Lamp
compartment is
hot! Allow it to
cool down before
changing lamp!
N
OTE
To Next Page
Loading...
Need help?
General
