- 20 -
4.2. Disassembly /Assembly
Assembly SOP
Preparation before assemble
1. Clean the room for work
2. Identify the area for material
3. Prepare the implement, equipments, material as bellow:
1) Press-fixture
2) Working table
3) Screw-driver
4) Knife*1
5) Glove
6) Cleaning cloth
7) ESD protection
ite
m
picture Operation Tool Notes
1
Put panel on the
cushion carefully,
2 Stick a big Al tape to
panel which can protect
the WIRE.
3 Check and put CLM-F
on the cushion
carefully,
To Next Page
Loading...
