- 10 -
3.3. Operational & Functional Specification
3.3.1 Video performance
*All spec. of monitor need to warm up at least 1hr.
Item Condition Spec OK
N.
A
Remark
Resolution
Any input resolution
modes which are under
1366x768
1366x768
√
Contrast ratio 600(min),1000(typ)
√
Set Contrast at
50, Brightness
User preset.
Brightness
At R/G/B saturated
condition
300 cd/m
2
(typ.),240(min)
√
Test
Condition : Set
contrast at
100 ,
brightness at
100 , color at
User preset.
Response time Rising + Falling time
On/off:5 ms
(typ.),8ms(max)
√
Test
Equipment:
Westar TRD
100 or equal
level
equipment ;
At Contrast ratio = 10
R/L: 85/85 degrees (typ.)
75/75 degrees (min)
√
Viewing angle
At Contrast ratio = 10
U/D: 80/80 degrees (typ.)
70/70 degress(min)
√
CIE coordinate of White
(0.313, 0.329) +/- (0.03,
0.03)
√
Display colors 16.7 Millions colors
√
6 bit+HiFRC
3.3.2 Brightness Adjustable Range
Item Condition Spec OK
N.
A
Remark
Brightness adjustable
range
At default contrast level
(saturate point) & Full-
white color pattern
(Max. brightness value –
Min. brightness value)
≧ 100 cd/㎡
√
3.3.3 Acoustical Noise
Item Condition Spec OK
N.
A
Remark
At 30cm distance
≦ 22dB/A
√
Acoustical Noise
At 5cm distance
≦35dB
√
Need to test if
is failed. Monitor
internal key
inverter, panel...)