76
Table 5-3. Agilent 6060B/6063B Parts List - Electrical (continued)
Reference
Designation
Models Agilent Part
Number
Description
BOTH 06063-60001
FRONT PANEL ASSEMBLY
A2 BOTH 5020-2693 PC BOARD ( keypad )
A3 BOTH 5061-3473 LCD DISPLAY
W1 BOTH 5060-3193 WIRE KIT (main board to J551 ac receptacle)
W1 BOTH 06060-60052 WIRE KIT (J551 to chassis ground)
W1 BOTH 0360-0378 TERMINAL SOLDER LUG ( ground lug )
W2 BOTH 06632-80002 AC CABLE ASSY ( S551 to J553 )
W3 BOTH 8120-4944 CABLE ASSY ( LCD display to main board )
W4 BOTH 06060-80001 CABLE RIBBON ( keypad to main board )
S2 BOTH 06060-40001 KEYPAD
S551 BOTH 3101-2862 SWITCH- ON/OFF
FRONT PANEL OPTION ( #020 )
TBP3,4 BOTH 1510-0134 BINDING POST
W5 BOTH 06060-80015 CABLE ASSEMBLY ( #8 AWG red/black )
Table 5-4. Agilent 6060B/6063B Parts List - Mechanical
Reference
Designators
Models Part Number Description
Al 6060B 06060-60022
MAIN BOARD
Al 6063B 06063-60022
MAIN BOARD
MP1 BOTH 0515-1114 SCREW-MACH M4 X 0.710MM-LG (heatsink to A1 board )
MP2 BOTH 0515-1285 SCREW-MACH M3.5 X 0.6 35MM-LG ( fan to heatsink )
MP3 BOTH 2190-0585 WASHER-LK HLCL ( fan )
MP4 BOTH 3050-0892 WASHER-FL METALLIC ( fan )
MP5 BOTH 0380-0181 SPACER-.75 IN ( fan )
MP6 BOTH 3050-0003 WASHER-FL NONMETALLIC ( fan )
MP7 BOTH 06060 20001 HEAT SINK ( Q2 )
MP8 BOTH 06060-20004 HEAT SINK ( Q1 )
MP9 BOTH 06060-20005 SPACER STRIP ( between heat sinks )
MP10 BOTH 0515-1374 SCREW-MACH M4 X 0.7 30MM-LG (heatsink to A1 board )
MP11 BOTH 0380-1999 STANDOFF-HEX 33-MM-LG M4.0 X 0.7-THD ( heatsink )
MP12 BOTH 0515-0210 SCREW-MACH M4 X 0.7 8MM-LG ( FETS to heatsink )
MP13 BOTH 0340-1217 INSULATOR THRM-CNDCT ( for left heatsink)
MP14 BOTH 06060-00003 BUS BAR
MP15 BOTH 0535-0082 NUT-HEX W/LKWR ( bus bar to pc board )
MP16 BOTH 0535-0031 NUT-HEX W/LKWR M3 X 0.5 2.4MM-THK ( Ref GPIB )
MP17 BOTH 0380-0643 STANDOFF-HEX ( GP-IB connector )
MP18 BOTH 2190-0586 WASHER-LK HLCL ( J201 )
BOTH 1205-0743 THERMAL INTERFACE PAD ( Q1, Q2 to heatsink )
BOTH 1400-0307 TIE WRAP ( ac cable )
BOTH 06060-00001
CHASSIS
MP1 BOTH 0515-1114 SCREW-MACH M4 X 0.710MM-LG ( pc board to chassis &
safety ground)
MPl9 BOTH 0515-0155 SCREW-MACH M5 X 0.8 12MM-LG (bus bar to binding
post )
MP20 BOTH 2190-0629 LOCKWASHER ( binding post )
BOTH 5063-4827 Ferrite bead kit