Agilent Technologies U2000H User Manual

Introduction 1
U2000 Series Operating and Service Guide 17
6 Click Finish when the installation has completed.
Figure 1-10 Completing hardware driver installations
7 Once the driver installation has completed, the Assign USB device alias
window may appear as shown below. Each time a USB device is plugged in,
this dialog will be shown. To configure or disable this dialog, select an
options in the Show this dialog panel and click OK.
Figure 1-11 USB device alias configuration

Agilent Technologies U2000H Specifications

General

Brand	Agilent Technologies
Model	U2000H
Category	Accessories
Language	English