In addition, check the following once a year:
- Free wheel movement.
- Function and free movement of the cutting height adjuster 8 .
- Function and free movement of the discharge flap 13 .
- Damage to the device, such as broken housing parts or worn collecting bag 5 .
If you detect any defects, contact customer service or a specialist workshop. Do not
operate the device with a detected defect.
Storage
NOTE!
Improper storage of the device can result in damage.
- Let the device dry before storing it. Residual moisture and
cuttings remaining in the device can lead to mould formation.
Optionally, the handle can be folded in to save space during storage or transport.
Folding in the handle
1. Release the quick-release levers 12 on the handle mount 11 .
2. Take the serrations of the locking washer out of the handle mount 11 by lifting
it slightly and then set down the handle on the device.
3. Release the quick-release levers 3 in the centre of the handle.
4. Carefully fold the handle. Watch out for the connection cable. It must not be
pinched between the handle parts.
The device is ready for storage.
Maintenance
17
To Next Page
Loading...
Need help?
General
