Storage conditions
- Thoroughly clean the device (see “Cleaning”).
- Store the device in a clean, dry, frost-protected place out of the reach of children.
- Store the device in a location away from sunlight and other heat sources.
- Always store device parts and accessories together with the device.
- Store the device and accessories at a temperature between +5 °C and +20 °C.
Transport instructions
-
Always transport the device with the handle folded in (see "Folding in the
handle")
- Only lift the device by the carry handle 7 .
- Exclusively transport the device in normal position; prevent tilting while
transporting.
- When transporting the device in vehicles, the device must be secured in
accordance with the applicable regulations (load securing).
Troubleshooting
Problem Possible cause Fault rectification
Motor does not start up The mains plug is not
correctly plugged in.
Check that the mains plug is
fitted properly.
The socket does not supply
any power/the fuse has
blown or the RCCB has
tripped.
Check the power cable for
damage.
The button on the safety
switch was not pushed.
Let go of the safety bar and
push the button on the
safety switch before pulling
the safety bar again.
The motor overload
protection has triggered, the
motor is overheated.
Allow the device to cool
down for 15-20 minutes.
Storage
18