PC Card / PCMCIA Problems
Note: Some system may not have the PC Card Slot option.
PC Cards do not function-
n Make sure you have properly installed the driver for the
card.
n Consult the card’s manual or contact the vendor for
trouble-shooting.
The PC card cannot be recognized -
n Windows NT4.0 does not support PCMCIA (PC Card)
function. You may need an external program for this.
n Make sure the card is fully inserted; the outer end of the
card should be even with the edge of the computer.
n Remove and insert the PC card again.
n Make sure there is no IRQ conflict with the card. See
Windows on-line help for solving IRQ conflicts.
n Reboot the computer and see if the problem persists.
n The card may be defective. Try the card on another
system, if possible.
Windows crashes or freezes when you remove the PC
card-
n Make sure you have <Stop> the PC card before
removing it. Double-click the Safely Remove Hardware icon at
the lower right corner of the task bar and select the card you
wish to stop. When you click <Close>, in few seconds Windows
will prompt you to remove the card.
To Next Page
Loading...
