EasyManuals Logo
Home>ALLEN & HEATH>Music Mixer>Qu-16

ALLEN & HEATH Qu-16 User Manual

ALLEN & HEATH Qu-16
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Qu Mixer User Guide 28 AP9372 iss.4
6.7 Channel Routing
The Touch Screen presents tabs to access the channel assignments and send levels when its fader strip
Sel key is selected and the Touch Screen Routing screen is active. The Channel Block Pan control
provides quick access to the related mix pan setting for the channel. The Fn key is used to access the
Mute Group masters while in any Routing screen.
6.8 Working with the Routing screens
Press a fader strip Sel key.
Press the Touch Screen Routing key.
Touch the tabs at the top of the screen.
Touch screen buttons and use the rotary.
Press the Fn key to access the Mute and DCA Groups.
Pan
The rotary Pan control becomes active when an input
channel Sel key is active. Its function depends on
currently selected Master Strip mix:
LR = Channel main pan
FX send = Disabled
Group (Qu-24) = Channel main pan
Mono Mix1-4 = Disabled
Stereo Mix5-10 = Channel send pan
Pan becomes a Width control when linked for two
input channels – Panning one to the left automatically
pans the other by the same amount to the right.
Channel Routing screen
Adjust the channel Direct Output Trim from off to
+10dB gain. The Direct Outputs can be patched to
feed the internal FX devices, for example a delay effect
send for a single vocal. They also feed the dSNAKE
Monitor outputs (ME Personal Mixing System), and
can be set as the CH/ST channel USB source.
The channel source for the Direct Outputs can be
changed on this screen. This is a global setting
affecting all channel direct outputs.
Typical Direct out settings:
FX send = Post Delay, Follow fader, Follow mute
ME Monitor = Post Comp, pre-fader, Follow mute

Table of Contents

Other manuals for ALLEN & HEATH Qu-16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ALLEN & HEATH Qu-16 and is the answer not in the manual?

ALLEN & HEATH Qu-16 Specifications

General IconGeneral
Sample rate48 kHz
Channels quantity16 channels
Digital sound processing- bit
Output impedance75 Ω
Built-in displayYes
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Power consumption (typical)82 W
XLR out12
RJ-45 ports quantity1
Headphone connectivity6.3 mm
Number of microphone inputs16
DJ mixer-
Product colorBlack
USB connector typeUSB Type-A, USB Type-B
Weight and Dimensions IconWeight and Dimensions
Depth500 mm
Width440 mm
Height186 mm
Weight10000 g
Package depth680 mm
Package width610 mm
Package height350 mm
Package weight13500 g

Related product manuals