EasyManuals Logo
Home>ALLEN & HEATH>Music Mixer>Qu-16

ALLEN & HEATH Qu-16 User Manual

ALLEN & HEATH Qu-16
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
Qu Mixer User Guide 55 AP9372 iss.4
8.11 Output Patch Setup – Surface
Use this screen to patch signals to
the rear panel Alt Out and AES
outputs. Touch a box to open up the
list of available options. Changes are
applied instantly. You can also touch
outside the list to exit.
Alt Out – Choose the source for the
rear panel stereo Alt Out jacks.
AES Out – Choose the source for
the rear panel AES digital output.
The reset default for both is LR post-
fade.
Group and Matrix outputs are not
available on the Qu-16.
8.12 Output Patch Setup – dSNAKE
This screen presents the patching for the dSNAKE
remote audio outputs. These outputs can be mapped
from any combination of Qu mixer output sources.
The Qu mixer detects which AudioRack type is
connected. A Qu system can have up to two
AudioRacks connected. These are shown as:
dSNAKE – The first (main) AudioRack connected.
Expander – The second (expander) AudioRack.
dSNAKE outputs can be patched with or without
physical AudioRacks connected.
All Qu mixer patching is stored in Scene memories.
The Reset Mix Settings defaults are shown below:
Qu-16
Reset dSNAKE Patch
dSNAKE Qu out
1 Mix 1
2 Mix 2
3 Mix 3
4 Mix 4
5 Mix 5
6 Mix 6
7 Mix 7
8 Mix 8
Ch Qu out
9 Mix 9
10 Mix 10
11 L
12 R
Exp Qu out
1 none
2 none
3 none
4 none
5 none
6 none
7 none
8 none
The following sources can be patched:
X Unassigned
Grp Group post-fader
Mix Mix 1-10 post-fader
LR pre LR mix – pre-fader
LR post LR mix – post-fader
L+R pre LR mono sum – pre-fader
L+R LR mono sum – post-fader
MTX Matrix post-fader
PAFL Stereo PAFL monitor
Qu-24 and Qu-32 Reset dSNAKE Patch
dSNAKE Qu out
1 Mix 1
2 Mix 2
3 Mix 3
4 Mix 4
5 Mix 5
6 Mix 6
7 Mix 7
8 Mix 8
Ch Qu out
9 Mix 9
10 Mix 10
11 L
12 R
Exp Qu out
1 MTX1 L
2 MTX2 R
3 MTX3 L
4 MTX4 R
5 Grp1 L
6 Grp2 R
7 Grp3 L
8 Grp4 R

Table of Contents

Other manuals for ALLEN & HEATH Qu-16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ALLEN & HEATH Qu-16 and is the answer not in the manual?

ALLEN & HEATH Qu-16 Specifications

General IconGeneral
Sample rate48 kHz
Channels quantity16 channels
Digital sound processing- bit
Output impedance75 Ω
Built-in displayYes
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Power consumption (typical)82 W
XLR out12
RJ-45 ports quantity1
Headphone connectivity6.3 mm
Number of microphone inputs16
DJ mixer-
Product colorBlack
USB connector typeUSB Type-A, USB Type-B
Weight and Dimensions IconWeight and Dimensions
Depth500 mm
Width440 mm
Height186 mm
Weight10000 g
Package depth680 mm
Package width610 mm
Package height350 mm
Package weight13500 g

Related product manuals