EasyManuals Logo
Home>ALLEN & HEATH>Music Mixer>Qu-16

ALLEN & HEATH Qu-16 User Manual

ALLEN & HEATH Qu-16
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
Qu Mixer User Guide 48 AP9372 iss.4
The Filter screen
A Recall Filter protects one or more parameter types
for all channels.
A scene stores all live mixing parameters. A Recall
Filter can be set to protect (block) chosen parameters
from being overwritten when the scene is recalled.
Each scene has its own filter. You can choose to recall
as many or as few parameters as you want for each
scene. For example, you could recall just fader levels
and mutes for a range of cues in a theatre show.
The Global Filter protects parameters from being
overwritten by any of the 100 scenes.
A red dot o appears in the tab if one or more items
have been blocked.
Filter parameters are grouped according to type and
association with inputs or outputs.
Note - The Qu-16 does not include Audio Groups and
Matrix outputs. Their associated parameters are not
included in its filter.
Filter parameters:
Inputs/FX (All CH, ST, FX Ret, Groups)
Input patch (Local, dSNAKE, USB)
Preamps (Gain/Pad/Trim/48V/Pol)
CH/ST process (Gate/PEQ/Comp/Dly)
Group processing (not Qu-16)
FX patch
FX parameters
Inputs/FX/Group Faders/Pan
Inputs/FX/Group Mutes
Inputs/FX/Group Names
Outputs (All FX Sends, Mix, LR, Matrix)
Input patch
Output patch (Sockets, Qu-Drive)
Mix process (PEQ/GEQ/Comp/Dly)
LR process (PEQ/GEQ/Comp/Dly)
Matrix processing (not Qu-16)
Master Faders
Master Mutes
Master Names
Routing
Audio Groups (Assign)
Mix sends (Lev/Pan/Assign/Pre)
FX sends (Lev/Assign/Pre)
Matrix sends (Qu-24 only)
Mute/DCA Groups (Assign)
Other
Mute/DCA Group Masters and Names
Custom Layer (Assign)
SoftKeys (Assign)
System (Talkback assign/HPF)

Table of Contents

Other manuals for ALLEN & HEATH Qu-16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ALLEN & HEATH Qu-16 and is the answer not in the manual?

ALLEN & HEATH Qu-16 Specifications

General IconGeneral
Sample rate48 kHz
Channels quantity16 channels
Digital sound processing- bit
Output impedance75 Ω
Built-in displayYes
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Power consumption (typical)82 W
XLR out12
RJ-45 ports quantity1
Headphone connectivity6.3 mm
Number of microphone inputs16
DJ mixer-
Product colorBlack
USB connector typeUSB Type-A, USB Type-B
Weight and Dimensions IconWeight and Dimensions
Depth500 mm
Width440 mm
Height186 mm
Weight10000 g
Package depth680 mm
Package width610 mm
Package height350 mm
Package weight13500 g

Related product manuals