Allen-Bradley 1756 Series User Manual

80 Rockwell Automation Publication 1756-UM013B-EN-P - October 2019
Chapter 5 Configure and Replace Safety Modules
New Remote I/O Module
To create a new remote safety I/O module, complete these steps.
1. Add a ControlLogix EtherNet/IP adapter to the project.
2. Right-click the EtherNet/IP adapter and choose New Module.
3. Select the module and click Create.
The New Module dialog box appears with a list of categories on the left
side. The number and type of categories varies by module type.

Allen-Bradley 1756 Series Specifications

General

Brand	Allen-Bradley
Model	1756 Series
Category	Control Unit
Language	English