300 Rockwell Automation Publication 1769-UM021G-EN-P - October 2015
Chapter 12 Use a Secure Digital Card
5. Click Load/Store.
6. Choose under what conditions to load the project into the user memory of
the controller.
If Load/Store is dimmed (unavailable), verify the following:
• You have specified the correct communication path and are online with the
controller.
• The memory card is installed.
If the memory card is not installed, a message in the lower-left corner of the
Nonvolatile Memory tab indicates the missing card as shown here.
Project that is currently on the memory card of
the controller (if any project is there).
Project that is currently in the user memory of
the controller.
To Next Page
Loading...
Need help?
General
