To Next Page

To Previous Page

10 Compact 1769-OF8C Analog Output Module

Publication 1769-IN065B-EN-P - September 2005

Wiring Output Devices

Basic wiring of output devices is shown below.

Labeling the Terminals

A removable, write-on label is provided with the module. Remove the label from

the door, mark the identification of each terminal with permanent ink, and slide the

label back into the door. Your markings (ID tag) will be visible when the module

door is closed.

ATTENTION

• Miswiring of the module to an AC/DC source will damage the

module.

• Be careful when stripping wires. Wire fragments that fall into

a module could cause damage at power up. Once wiring is

complete, ensure the module is free of all metal fragments.

ANLG Com

dc NEUT

+24V dc

I out 7+

I out 6+

I out 5+

I out 4+

I out 3+

I out 2+

I out 1+

I out 0+

Current Load

earth ground

External 24V dc Power

Supply (optional)

Allen-Bradley 1769-OF8C User Manual

Questions and Answers: