EasyManuals Logo
Home>Allen-Bradley>Control Unit>SLC 500 BASIC

Allen-Bradley SLC 500 BASIC Installation Instructions

Allen-Bradley SLC 500 BASIC
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Publication 1746-IN009B-EN-P - August 2005
Installation Instructions
SLC 500 BASIC and BASIC-T Modules
Catalog Numbers 1746-BAS and 1746-BAS-T
Inside . . .
For See Page
Important User Information 2
Hazardous Location Considerations 3
Environnements dangereux 3
About the BASIC and BASIC-T Modules 4
Before You Begin 5
Install the 1746-BAS Module and 1746-BAS-T
Module
12
Wire the PRT1 and PRT2 Communication Ports 13
Wire to the DH485 Port 18
Apply Power to your BASIC Module and
BASIC-T Modules
19
Configure the BASIC Module and BASIC-T
Module
19
Battery Replacement, Handling, Storage, and
Transportation (Cat. No. 1747-BA)
20
Specifications 24
Additional Resources 26

Other manuals for Allen-Bradley SLC 500 BASIC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allen-Bradley SLC 500 BASIC and is the answer not in the manual?

Allen-Bradley SLC 500 BASIC Specifications

General IconGeneral
BrandAllen-Bradley
ModelSLC 500 BASIC
CategoryControl Unit
LanguageEnglish

Related product manuals