Manual Reset
This feature allows the owner to reset the washer control’s pro-
gramming data to the factory default settings by pressing a se-
quence of pads on the control.
How to Enter Manual Reset
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the DELICATES (∧) or the COLD (∨) keypad until
Prog appears in the display. Press the START (enter) keypad,
and AtS 1 will appear in the display.
3. Press the DELICATES (∧ ) or the COLD (∨ ) keypad to scroll
through the programmable options until rESEt appears in the
display.
4.
Press the START (enter) keypad. no will appear in the dis-
play.
5. Press the DELICATES (∧) or the COLD (∨) keypad to change
the value to yes.
6. Press the START (enter) keypad when the correct value ap-
pears in the display.
Manual Reset
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
69 Part No. 204370ENR1
To Next Page
Loading...
Need help?
General