Alpine CDE-173EBT User Manual

19-EN
ALPINE CDE-170E 68-40368Z02-A (EN) 128x182
Settings
Canceling the DEMO Mode
You can cancel the demonstration display which
appears when the source is off and the clock is
displayed.
1 Press and hold /SETUP for at least 2
seconds, rotate the control dial to select
[GENERAL], then press it.
2 Rotate the control dial to select [DEMO
MODE], then press it.
3 Rotate the control dial to select [DEMO
OFF], then press it.
The setting is complete.
4 Press (back) twice.
The display returns to normal reception/play
mode.
Basic Setting Operation
You can set items in the following setup
categories:
General setup (GENERAL), Audio setup (AUDIO),
Display setup (DISPLAY), BLUETOOTH setup
(BLUETOOTH)
1 Press and hold /SETUP for at least 2
seconds.
2 Rotate the control dial to select the setup
category, then press it.
The items that can be set differ depending on
the source and settings.
3 Rotate the control dial to select the
options, then press it.
To return to the previous display
Press (back).
General Setup (GENERAL)
DEMO MODE (demonstration)
Activates the demonstration: [ON], [OFF].
CLOCK ADJ (clock adjust) (page 8)
FM STEP (page 8)
(Available only while the source is off and the
clock is displayed.)
CAUTION ALM (caution alarm)
Activates the caution alarm: [ON], [OFF] (page
8).
(Available only while the source is off and the
clock is displayed.)
BEEP
Activates the beep sound: [ON], [OFF].
AUTO OFF
Shuts off automatically after a desired time
when the unit is turned off: [ON] (30 minutes),
[OFF].
USB MODE
Changes the USB mode: [MSC/MTP],
[ANDROID].
(Available only when the USB source is
selected.)
RDS CT (clock time)
Activates the CT function: [ON], [OFF].
FIRMWARE
(Available only while the source is off and the
clock is displayed.)
Checks/updates the firmware version. For
details, consult your nearest Alpine dealer.
FW VERSION (firmware version)
Displays current firmware version.
FW UPDATE (firmware update)
Enters firmware update process: [YES], [NO].
Updating the firmware takes a few minutes to
complete. During the update, do not turn the
ignition to the OFF position, nor remove the
USB device.

Alpine CDE-173EBT Specifications

General

Brand	Alpine
Model	CDE-173EBT
Category	Car Receiver
Language	English