Alpine CDE-185BT User Manual

22-EN
Some functions may be available in a future version of TuneIt.
Note
• Depending on the paired Smartphone, the following functions may not
be available even though the TuneIt version is updated.
Receiving Notification
When the Smartphone connected to this unit receives notification from
Facebook, the unit’s back lighting and the V indicator blink
(depending on the TuneIt settings on the phone). At the same time, the
user’s name is shown in the display (20 characters maximum). Play back
the notification via TTS (Text To Speech) by the following procedure.
1 While receiving Notification from Facebook, press
VSOURCE button.
Notification Menu screen is displayed.
2 Turn the Rotary encoder to select the desired mode, and
then press ENTER.
LIKE
*1
 REPLAY  NEXT  PREVIOUS  TTS VOLUME
*2
*1 Not displayed when the received Notification is Message type.
*2 It can also be set in SETUP section. For details, refer to “Setting
the TTS (Text To Speech) volume” on page 25.
Notes
•Press t to return to the previous mode.
• A new received Notification prompt will last for 30 seconds. If there is
no operation within 30 seconds, the unit will return to normal mode.
• In some situations, such as the unit is powered off or during a call, etc.,
notification of the Smartphone will not be prompted by this unit.
Displaying Notification List
You can view the received Notification from Facebook in the connected
Smartphone via this unit.
1 Press and hold VSOURCE for at least 2 seconds.
The received Notification will be displayed according to when it
was posted.
2 Turn the Rotary encoder to select the desired Notification,
and then press ENTER.
3 Then go to step 2 of “Receiving Notification”.
Notes
• When there is no Notification, “NO NOTIF” will be displayed.
• The displayable amount of the Notification list depends on the
connected Smartphone.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1 Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2 Turn the Rotary encoder to select the desired item, and
then press ENTER.
AUDIO
*1
 GENERAL  DISPLAY  TUNER  IPOD  APP 
BLUETOOTH
*2
 AUDIO
(e.g. Select GENERAL)
GENERAL:
CLOCK MODE AUTO CLOCK  CLOCK ADJ
*3
 MENU LANG
 AUX SETUP  AUX NAME
*4
 PLAY MODE  STAY ON 
DEMO MODE  CLOCK MODE
DISPLAY:
ILLUMINATI  ANALYZER  DIMMER  TEXTSCROLL 
SCROLLTYPE  ILLUMINATI
TUNER:
AF
*5
 REGIONAL
*6
 PI SEEK
*7
 FM SET  AF
IPOD:
IPOD LIST
APP:
ALPINE APP  TTS VOLUME  ALPINE APP
*1 Refer to “Sound Setting” on page 17.
*2 Refer to “BLUETOOTH SETUP” on page 26.
*3 Refer to “Setting Time” on page 10.
*4 Displayed only when AUX SETUP is set to ON.
*5 Refer to “Turning AF (Alternative Frequencies) ON/OFF” on
page 12.
*6 Refer to “Receiving RDS Regional (Local) Stations” on page 12.
*7 Refer to “PI SEEK Setting” on page 12.
3 Select an Item with the Rotary encoder, and then press
ENTER.
(e.g. Select AUX SETUP)
Facebook Notification Function
LIKE: The Smartphone feedbacks to Facebook with “Like”,
and meanwhile, the received Wall Posts or
Comments are played back by TTS (Text To
Speech).
REPLAY: To play back Notification by TTS (Text To Speech)
again.
NEXT: To select the next Notification.
PREVIOUS: To select the previous Notification.
TTS VOLUME: To adjust the playback volume of TTS (Text To
Speech).
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.

AUDIO/SETUP
6
/SOURCE
/ENTER


Rotary encoder

Alpine CDE-185BT Specifications

General

Brand	Alpine
Model	CDE-185BT
Category	Car Receiver
Language	English