Alpine CDE-185BT User Manual

29-EN
Incoming calls are announced by the received call ring tone and a
displayed message (PHONE).
Press f or ENTER.
The call starts.
Notes
• When “AUTO ANS” is set to ON, you can receive a call automatically.
Refer to “Setting the Received Calls automatically (Auto Answer)” on
page 28.
• While calling, the source sound on the unit is muted. After calling,
playback will resume.
Press f or t.
The call finishes.
Call History is recorded for the last dialled/received/missed calls (20
records for each). There are various ways of making calls based on the
“Calling”. The following steps 1 to 5 are common to the various ways of
making these calls. For details, refer to each individual category for
making calls.
1 Press f.
The outgoing method list is displayed.
2 Turn the Rotary encoder to select the outgoing mode.
Setting contents:
DIALLED / RECEIVED / MISSED / PHONE BOOK
DIALLED:
Dialled history
RECEIVED:
Received history
MISSED:
Missed incoming history
PHONE BOOK:
Smartphone phone book
3 Press ENTER.
The outgoing mode is activated, and each mode list is displayed.
Note
• It may take some time for the list to be displayed after connection. This
list may not always update, depending on the connected device.
4 Turn the Rotary encoder to select a name or a telephone
number from the list.
Note
• You can use Phone book alphabet search function to search a name or
number from Phone Book. For details, refer to “Phone book Alphabet
Search Function” on page 30.
5 Press ENTER.
The selected telephone number will be called.
If one name has several numbers registered in the telephone
book, press ENTER after selecting the name
*
, and then turn
the Rotary encoder to choose the desired number and press
ENTER, the telephone will be called.
* If the name cannot be recognised, “NO NAME” will be displayed.
Notes
•Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Redialling a Number In Outgoing History
Previously dialled telephone numbers (maximum number of call record
is 20) are stored in dialled calls history. You can redial a number by
searching from dialled calls history.
 Setting item: DIALLED
Dialling a Number In Incoming History
Telephone numbers from received calls (maximum number of call
record is 20) are stored in the Received List. You can redial these
numbers by searching here.
 Setting item: RECEIVED
Dialling a Number In Incoming Missed Call
History
Telephone numbers for received calls (maximum number of call record
is 20) that are missed, are stored in the Missed List. You can redial these
numbers by searching here.
 Setting item: MISSED
Dialling a Number In The Phone Book
Up to 1,000 names (at most 5 telephone numbers for each name) are
downloadable from a Smartphone. Dial a call by selecting a person from
the phone book list.
 Setting item: PHONE BOOK
Notes
• The order of the list display depends on the setting of “PB ORDER”
(refer to “Changing the Phone book List Order” on page 28).
• If the call history or phone book of the Smartphone is added or deleted
while it is connected to the unit, the list displayed on the unit may not
be brought up to date. If it is not updated, you cannot correctly place a
call.
• You can display the information of a number stored in phone book by
pressing VIEW. Each press changes the display as Name  Telephone
label
*
/Telephone NO.  Name
If the information cannot be obtained, “NO NAME”, “NO LABEL” or
“NO NUMBER” will be displayed.
* The telephone label of a number depends on the number information
stored in Phone book of the Smartphone, which includes 4
types-MOBILE, HOME, OFFICE and OTHER.
Answering a Call
Hanging up the Telephone
Calling

Alpine CDE-185BT Specifications

General

Brand	Alpine
Model	CDE-185BT
Category	Car Receiver
Language	English