CAUTION
REFIT THE BATTERY ONLY 5-10 MINUTES AFTER DISCONNECTING THE
CHARGER AS THE BATTERY KEEPS PRODUCING GAS FOR A SHORT TIME.
Use of a new battery (03_14)
(MC50) MODEL
•
Remove the battery cover «2».
•
Place the battery in its housing.
•
Connect the battery breather pipe.
CAUTION
ALWAYS CONNECT THE BATTERY BREATHER SO THAT SULPHURIC ACID
STEAM FROM THE BREATHER DOES NOT CORRODE THE ELECTRICAL SYS-
TEM, PAINTED PARTS, RUBBER COMPONENTS OR GASKETS.
•
Connect the (red) positive lead (+) first and then the negative one (-).
•
Cover the leads and terminals with special grease or petroleum jelly.
•
Refit the battery cover «2».
(MC125) MODEL
•
Connect the (red) positive lead (+) first and then the negative one (-).
•
Cover the leads and terminals with special grease or petroleum jelly.
CAUTION
UPON REFITTING, THE ELECTRIC WIRES SHOULD BE LED INTO POSITION SO
THAT THEY DO NOT GET CRUSHED.
77