Aqua Computer LEAKSHIELD User Manual

LEAKSHIELD
In the configuration you can also view the settings of the wizard for the "Pump"
area and change them directly. You can find more information about the details in
chapter 10.1 (Pump). However, we recommend to make the settings only using the
wizard.
12.6.
12.6.12.6.
12.6. Flow
FlowFlow
Flow
The sixth sensor displayed is the flow measurement value of your system (if avail-
able). This value is transmitted via USB from the Aqua Computer background ser-
vice to LEAKSHIELD.
In the configuration, you also have direct access to the settings made in the wizard
in the "Flow" area. In addition, you can adjust the sensor name and the log inter-
val.
You can find more information about the details in chapter 11.1 (Flow). We rec-
ommend that you only make the settings using the wizard.
12.7.
12.7.12.7.
12.7. Software sensors
Software sensorsSoftware sensors
Software sensors
The last twelve sensors in the list are software sensors and can be used to transmit
sensor data that is not physically available to LEAKSHIELD from the computer by
USB connection.
Select the appropriate unit for each configured data source. For manipulation of
the displayed sensor value, a scale factor and an offset may be configured. Data
from third party software regularly requires the scale factor to be adjusted.
Transmission of sensor data via USB interface
During installation of the aquasuite, the background service “Aqua Computer Ser-
vice” is also installed. This service supplies various data from PC components and
imported data from aquasuite web, additionally sensor data provided by third par-
ty software can be accessed. In order to access third party software data, the third
party software has to be correctly installed, configured and running.
Currently, the “Aqua Computer Service” supports data transfer from “HWiNFO”
(REALiX, Freeware, www.hwinfo.com) and “AIDA64” (FinalWire Ltd., subject to li-
cense fees, www.aida64.com).
HWiNFO automatically exports all sensor values, the “Sensor Status” Window has
to be open.
In the AIDA64 preferences menu, writing to WMI must be activated in the “external
applications” sub-menu:
© 2021 Aqua Computer GmbH & Co. KG - 21 -
Gelliehäuser Str. 1, 37130 Gleichen
c
o
m
p
u
t
e
r
a
q
u
a

Aqua Computer LEAKSHIELD Specifications

General

Brand	Aqua Computer
Model	LEAKSHIELD
Category	Protection Device
Language	English