Aqua Computer LEAKSHIELD User Manual

LEAKSHIELD
The LEAKSHIELD system is switched off. The vacuum is automatically released, and
pressure equalization occurs automatically.
TESTER (Action)
TESTER (Action)TESTER (Action)
TESTER (Action)
In this action, a leak test of the cooling system is enabled. A configurable negative
pressure is generated as a test pressure and then the pressure loss is displayed.
FILL (Action)
FILL (Action)FILL (Action)
FILL (Action)
This action makes it possible to suck coolant into the system. A vacuum of between
250 and 300 mbar is generated for this purpose.
During filling, the water pump must be switched off. Therefore, we recommend fill
During filling, the water pump must be switched off. Therefore, we recommend fillDuring filling, the water pump must be switched off. Therefore, we recommend fill
During filling, the water pump must be switched off. Therefore, we recommend fill-
--
-
ing while the PC is on standby!
ing while the PC is on standby! ing while the PC is on standby!
ing while the PC is on standby!
DEAERATION (action)
DEAERATION (action)DEAERATION (action)
DEAERATION (action)
This action supports the venting of the system during filling by cyclically generating
and releasing negative pressure.
LEVEL SENSOR (action)
LEVEL SENSOR (action)LEVEL SENSOR (action)
LEVEL SENSOR (action)
The measurement of the level in the reservoir is triggered by this action. This func-
tion can only be used appropriately after configuration via the aquasuite!
EXIT
EXITEXIT
EXIT
Exit the menu.
The respective function is selected by pressing the key again for a longer than 1
second.
8.
8.8.
8. aquasuite software
aquasuite softwareaquasuite software
aquasuite software
The Windows software aquasuite is an extensive software suite and can be used
for configuration and monitoring. The software is not required for operation
though. All configuration parameters can be saved into the device's memory.
Please note: Depending on the type of product you are using, some features may
not be available for your device.
8.1.
8.1.8.1.
8.1. Installation of the aquasuite software
Installation of the aquasuite softwareInstallation of the aquasuite software
Installation of the aquasuite software
For configuration and monitoring of our products with USB interface, the aquasui-
te software is available for download from our website www.aqua-computer.de.
You will find the setup program in the support section of the website under Down-
loads/Software.
The setup program checks all connected USB devices for embedded update ser-
vice periods and offers various aquasuite versions depending on detected devices.
If no device with update service for the latest aquasuite version is found, a warning
- 8 - Aqua Computer GmbH & Co. KG © 2021
Gelliehäuser Str. 1, 37130 Gleichen
c
o
m
p
u
t
e
r
a
q
u
a

Aqua Computer LEAKSHIELD Specifications

General

Brand	Aqua Computer
Model	LEAKSHIELD
Category	Protection Device
Language	English