INSTALLATION
/ 21
Warning
The exhaust gas ducts must not be in contact with or close
to inammable material and must not pass through building
structures or walls made of inammable material.
When replacing an old appliance, the ue system must be
changed.
Important
Ensure that the ue is not blocked.
Ensure that the ue is supported and assembled in accordance
with these instructions.
150 mm
118
* Min slope: 1˚
1˚= 17.5mm per metre
150 mm
* pente
Installation without extension
Installation with extension
Level
Level
slope
Fig. 3
118 mm
150 mm
Minimum Length = 500 mm
180 mm
Fig. 2
To Next Page
Loading...
Need help?
General