Aritech FP2000 Series User Manual

FP2000 SERIES ANALOGUE ADDRESSABLE FIRE PANEL: USER INSTRUCTIONS Version 3.1
2.5
FIRE BRIGADE
SIGNAL (Keyswitch )
A red LED will indicate that the signal has been activated.
Please refer to your Installer to the exact way of operation.
DELAY ON/OFF
The programmed Fire Brigade Signal Delay may be toggled ON or OFF. Two LED’s
indicate the state.
FAULT/DISABLE (Keyswitch
)
The Fire Brigade output may be disabled by using this push-button. When the signal
is disabled, then the disable LED will be illuminated.
The Fire Brigade circuit is monitored. The Fire Brigade fault LED will flash when a
fault is detected in the circuit.
STOP FIRE BRIGADE (Keyswitch
)
A yellow LED will indicate that the Fire Brigade signal has been deactivated.
Please refer to your Installer to the exact way of operation.
Page 8 May 1997 Product Code: LKFP2403 Document No: 970528/205/M

Aritech FP2000 Series Specifications

General

Brand	Aritech
Model	FP2000 Series
Category	Fire Alarms
Language	English