Bedienungsanleitung Counter AC-10 AC-15 09/2020 Seite 23 von 37
Operating instructions Counter AC-10 AC-15
- Press the "Next" button to save the patient and counter data.
Load t
he patient information:
- Press the "Search Data" button in the software.
- Enter the data you are looking for in the search window.
- Confirm your selection.
Print
the patient information:
- Click on "File" in the menu then on "Print".
Save the patient database:
- Click on "File" in the menu, then "Open Database Directory".
- Back up the database with a program of your choice.
4 Cleaning and maintenance
Surface and operating elements may be cleaned with a mild dishwashing detergent (water and a standard
dishwashing detergent) and a soft, non-fuzzing moist cloth. Do not use a wet cloth. Use only a small amount
of dishwashing detergent. Do not use chlorine bleach or other chlorine-based cleaning products with metallic
components under any circumstances. These will damage the surface of the instrument. If you use any other
cleaning method, please make sure that the intended method does not cause any damage to the instrument.
The On/Off Switch on the device does not disconnect the device from the power source.
Remove the plug from the AC power outlet to disconnect the instrument from the mains
supply entirely.
5 Dismantling and disposal
5.1 Dismantling
1. Switch the instrument off.
2. Disconnect the instrument from the mains.
3. Now the instrument may be removed from the working area.
5.2 Disposal
Please dispose of used instruments and defective components at your local recycling collection
point. Prior to disposal, sort according to materials: metal, glass, plastic, etc. Also, be sure to
dispose of the packing material in an environmental-friendly manner.
6 Transport and storage
Prior to transport:
Switch the instrument off and unplug the power supply.
Place the instrument and its parts in its original packaging or another suitable container to protect it during
transport. Close the packaging with adhesive tape.
Store the instrument in a dry environment. Please observe the specified conditions of the ambient
(temperature and humidity).
Do not subject the instrument to mechanical shocks or vibration during transporting it.
In case you do not use the original packaging, please mark the box with the following notes:
To Next Page
Loading...
Need help?
General
