1-10
Chapter 1: Product introduction
(continued on the next page)
DDR4 2133 MHz capability
Vendors Part No. Size
SS/
DS
Chip Brand Chip NO. Timing Voltage
DIMM socket support
(Optional)
1 DIMM 2 DIMMs 4 DIMMs
SAMSUNG M378A5143DB0--CPB 4G SS SEC 428 BCPB K4A4G085WD 13-13-13-33 1.5V • • •
SAMSUNG M378A1G43DB0--CPB 8G DS SEC 428 BCPB K4A4G085WD 13-13-13-33 1.5V • • •
G.SKILL F4-2133C15Q-32GRK 8G DS N/A Heat-Sink Package 15-15-15-35 1.2V • • •
G.SKILL F4-2133C15Q-16GRB 4G SS N/A Heat-Sink Package 15-15-15-35 1.2V • • •
GLOWAY PC4-17000 4G SS N/A Heat-Sink Package 15-15-15-35 1.2V • • •
KINGSTON HX421C13PBK4/16 4G SS N/A Heat-Sink Package - 1.2V • • •
KINGSTON HX421C14FB/8 8G DS N/A Heat-Sink Package 14-14-14-35 1.2V • • •
KINGSTON HX421C14FBK4/32 8G DS N/A Heat-Sink Package - 1.2V • • •
PANRAM PUD42133C138G4NJW 8G DS N/A Heat-Sink Package 13-13-13-35 1.2V • • •
PANRAM PUD42133C134G4NJW 4G SS N/A Heat-Sink Package 13-13-13-35 1.2V • • •
CORSAIR CMK16GX4M4A2133C15 4G SS N/A Heat-Sink Package 15-15-15-36 1.2V • • •
CORSAIR CMV4GX4M1A2133C15 4G SS N/A 4GA72Z9RGR 13-13-34-33 1.5V • • •
CORSAIR CMV8GX4M1A2133C15 8G DS SEC 446 BCPB K4A4G085WD 13-13-13-33 1.5V • • •
CRUCIAL MTA8ATF51264AZ-2G1A1 4G SS MICRON 4QA77D9RCQ 13-13-13-33 1.2V • • •
TEAM TED48GM2133C15BK 8G DS SEC 437BCBP K4A4G085WD 15-15-15-36 1.2V • • •
TEAM TED44GM2133C15BK 4G SS SEC 443 BCBP K4A4G085WD 15-15-15-36 1.2V • •
APACER 78.C1GM3.AF10B 8G DS SK HYNIX H5AN4G8NMFR 14-14-14-33 1.5V • • •
APACER AU04GGB13CDTBGC 4G SS SK HYNIX H5AN4G8NMFR 14-14-14-33 1.5V • •
TEKISM T4U2133B8G15-SAD 8G DS SEC 446 BCPB K4A4G085WD - - • • •
• SS: Single-sided / DS: Double-sided
DIMM support:
• 1 DIMM: Supports one module inserted into any slot as Single-channel memory
conguration. Install the module into A2 slot for better compatibility.
• 2 DIMMs: Supports two modules inserted into the same color slots as one pair of
Dual-channel memory conguration. Install the modules into A2/B2 slots
for better compatibility.
• 4 DIMMs: Supports four modules inserted into all slots as two pairs of Dual-channel
memory conguration
• Visit the ASUS website at www.asus.com for the latest QVL.
• When running XMP at DDR4 3200 MHz or higher, the system’s stability depends on
the CPU’s capabilities.
• Highly recommended to use 4-DIMM/2-DIMM kit for full DIMM conguration. Full
DIMM support is subject to the physical characteristics of individual CPUs or
Memory.
• Memory module with memory frequency higher than 2133 MHz and its corresponding
timing or the loaded XMP Prole is not the JEDEC memory standard. The stability and
compatibility of these memory modules depend on the CPU’s capabilities and other
installed devices.
• Due to Intel
®
chipset limitation, DDR4 2133 MHz and faster memory modules on XMP
mode will run at the maximum transfer rate of DDR4 2133 MHz.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
